ID #1751

Integration of HID Omnikey 5325 USB Proximity card reader with FusionRetail 6

HID (Human Interface Device) card is widely used in business organization as ID card. You can use HID card reader in FusionRetail6 prepaid card system used in canteen and food court.
HID Card Reader
Step 1: Download the drivers:
    1. Download  Fr6ThirdPartyDrivers.exe from here
    2. Run the above file to extract its content to C:\FusionRetail6\ or the directory where FR6 is installed.
    3. Before extract make sure that all of the applications of Fr6 are closed.
    4. Install HID_OMNIKEY5x2x_x86_R1_2_9_2.exe from C:\FusionRetail6\Fr6ThirdPartyDrivers\
    5. Now plug in HID card reader to USB port. It will detect the driver automatically.
Introduction: Fr6ThirdPartyDrivers.exe: 
RanceLab® FusionRetail™6 Third Party Drivers: These drivers are required by RanceLab® FusionRetail™6 to integrate some devices. It installs all the necessary drivers and dll files required to integrate 3rd party devices. Please choose the installed folder of FR6 during the installation.
Step 2: Edit C:\FusionRetail6\FR6.CreditCard.xml file:
  1. Open C:\FusionRetail6 \FR6.CreditCard.xml by right clicking and open in Notepad.
  2. Go to the bottom of the file
  3. And then type the following changes as shown in the picture below, please skip this if the changes is already exist.
  • There are two more dll files for different types of card readers and that are FwS3Dll.dll, dcrf32.dll. You just need to make winscard.dll file active and FwS3Dll.dll, dcrf32.dll file inactive. Adding "<!--" at line start and "-->" at line finish will make the dll file inactive and adding “<” at line start and “>” at line finish will make the dll file active for the software. Else you may choose to completely delete the line which is not required.
  • Two dlls will not work at the same time, so make sure that only one dll is active.
Step 3: Assign a Card to a Customer:
  1. Go to the Customer Master (M O C)
  2. Put one card on the card reader, now if it asks for driver then just ignore that and set “Do not ask for the driver again” else every time it will ask for driver.
  3. Select an existing customer
  4. Press Alt+C at Card Number field to assign the card
  5. Then press Alt+S to save.
You cannot assign a HID Card while creating a new customer, as this feature works only with already created
customers. So you need to create a customer first then after assign a card in modify mode.
Step 4: Sales Transaction Option:
  1. Press Alt+O in Sale Invoice (Scan POS) (S T S)
  2. Set Quick Mode to “Type of Operation (Module)” field
  3. Set Smart Card Device to “Prompt to select Customer on start” field
  4. Set Yes to “Activate Prepaid System” field
  5. Now press Alt+S to save the option.
Step 5: HID Card Transactions e.g. Fill, Refill and Refund:
  1. Go to the Prepaid Card Transaction (S T P)
  2. Put customers HID card on card reader
  3. Press “F7” or click on “F7 Read Card” to get the card selected for transaction.
For more detail please check the links given below;
Step 6: Sale Transaction:
  1. Go to the Sale Invoice (Touch POS) (S T T)
  2. It will prompt you to “Use Your Card” screen
  3. Put customer’s HID card on the card reader
  4. Click on Read button to select the customer.
Use Your Card

Tags: Customer Master, Hardware Settings, Prepaid, Sale Invoice

Related entries:

You cannot comment on this entry